Pr!sm

Born to be made for #infill, forced to be a #highway project
Jokes aside i’m not sure if i’ll ever finish it but i’ll try :D

This little github repo will serve as a journal for the entire project. You’ll find (in theory) everything I did & went through and maybe how I succeeded :)

Goals

Fits inside a backpack -> very portable (i’ll bring it to hq if i can)
Bed slinger 3d printer
350$ budget (maybe less :/)
Looks nice (eink screen!!!!)
~~I don’t die in the process~~

May 18th

Working on the precise bom to see if everything can fit in budget :D
You can access it here
Then i decided i should better start with a quick sketch and used onshape to do so.
.

May 19th

I started to work on the frame and the base. Onshape is such a pain to work with
Started to think about how i’m going to move the bed too. I may have a big problem :(
. <img width=“622” alt=“image” src=https://github.com/user-attachments/assets/3ddbf4b7-3143-4180-8b0c-597eff2a2082 />

May 20th to 23rd

I added linear rails, first one then realized i needed two to get a better stability
I also added a belt to move the bed.
Started to work on the z axis but nothing really important yet.
Bed plate is finished!!